AOYUE Int852A+ Hot Air Station Digital SMD Rework Station
This is a microprocessor controlled Aoyue 852A+ hot air SMD rework station. The 852A+ model is particularly clear and there are no operating problems. The temperature is shown on a digital display. The built-in temperature sensor ensures an absolutely constant temperature regardless of the air flow rate set. The device switches to a "sleep mode" when the handle is put down and cools down the heating element, which leads to low energy costs and a longer service life of the heating element. Temperature and air can be adjusted via the digital displays using soft push buttons. Airflow is also displayed very accurately via a metal ball air riser tube. The housing has a practical carrying handle and is painted black. Of course, you also get four different nozzles with the station, as well as a Vaccum Pen Aoyue 939 (with replacement tips). The 852A+ is very good for repairingQFP, SOP, PLCC and SOJ components
The station has a practical shelf for the hot air handle on the side, making work very easy and simple.
The station comes with a transport lock (a red Phillips screw that secures the pump during transport), this must be removed BEFORE switching it on for the first time! And then the system is completely ready for use. So you only need about 5 minutes and then you have a complete hot air station.
The station has a practical shelf for the hot air handle on the side, making work very easy and simple.
The station comes with a transport lock (a red Phillips screw that secures the pump during transport), this must be removed BEFORE switching it on for the first time! And then the system is completely ready for use. So you only need about 5 minutes and then you have a complete hot air station.
We Also Recommend
